Closed Loop Cooling Tower
1. Environmentally friendly and energy-saving
Closed-loop fluid circulation reduces scaling and clogging, saving energy by up to 95%
2. Professional customization
National-level cooling tower testing center and designated performance testing base, meeting customers' customized requirements
3. Efficient cooling
The secondary packing design and serpentine corrugated joint heat exchanger increase the heat exchange area by 15% per meter
4. Quality Assurance
The main components are matched with first-line brands at home and abroad
5. Easy installation
Modular design reduces on-site welding
Closed Loop Cooling Tower
Closed Loop Cooling Tower principle and application:
Module of closed cooling tower is red copper coil with high heat transfer efficiency, allows working fluid (purified water or other liquid) pipeline pass through, makes heat exchange with air through fan to complete at a time so as to achieve energy efficiency and environmental protection and maintain pipeline cooled clean and smooth. It is available for long-term operation by connecting water inlet and outlet at user's site. It is another high-end choice for modern industrial cooling and is widely applicable to complete induction and heating equipment, IF furnace, die casting machine, etc.
The circulating water system is divided into:
1. The internal circulating water system:
Circulating water enters into the copper pipe after heat exchange with the heat source to rise in temperature, and carries out heat exchange indirectly with spray water outside the pipe. The cooled circulating water flows out from the tower and is sent to heat source by the system circulating water pump (the cooled equipment).
2. The external circulating water system:
The spray water is sent from the lower water tank to the upper spray water tank by the spray pump. Water that freely falls, and coil and filling transfer heat by contacting, heat finally dissipates from both sides of the tower into the dry cold air to be carried away, and the spray water after cooling falls into the lower water tank for circulating again.
The internal circulating water can carry out heat exchange with the spray water and air outside the pipes through coiled pipes, so as to avoid the water pollution caused by the direct contact between the cooled water and air. The heat transfer effect is obviously better than that of the air cooler because of the spray water that is cooled by PVC filling outside pipes.
Applicable scope
★Induction heating industry
★Industrial fluid
★Water jacket cooling of air compressor
★Injection molding machine cooling
★Transformer cooling
★Glass melting furnace cooling
★Power plant
★Chemical plant
Technical parameter table of FBP Closed Loop Cooling Tower
Model | Motor power KW | The fan diameter mm | Spray pump power KW | Spray flow m3/h | Pressure drop of the coil K Pa | Own weight Kg | Operating weight Kg | Overall dimensions A×B×H (mm) |
FBP-15 | 1.1 | 900 | 0.75 | 22 | 10 | 920 | 1830 | 1400×1400×2900 |
FBP-20 | 1.5 | 1200 | 0.75 | 34 | 15 | 1220 | 2560 | 1600×1600×3370 |
FBP-30 | 2.2 | 1400 | 1.1 | 45 | 25 | 1460 | 3066 | 2000×2000×3595 |
FBP-40 | 3 | 1500 | 1.5 | 60 | 30 | 1620 | 3402 | 2400×2400×3740 |
FBP-50 | 4 | 1768 | 1.5 | 60 | 45 | 1780 | 3740 | 2580×2580×3915 |
FBP-65 | 5.5 | 2360 | 3 | 118 | 60 | 2120 | 4450 | 3120×3120×4040 |
FBP-80 | 5.5 | 2560 | 3 | 118 | 75 | 2480 | 4960 | 3420×3420×4220 |
FBP-100 | 7.5 | 2954 | 4 | 180 | 15 | 2920 | 5840 | 3900×3900×4525 |
FBP-125 | 11 | 3340 | 5.5 | 217 | 20 | 3220 | 6440 | 4260×4260×4760 |
FBP-150 | 5.5×2 | 2560×2 | 3×2 | 118×2 | 75 | 4960 | 9920 | 6790×3420×4220 |
FBP-200 | 7.5×2 | 2954×2 | 4×2 | 180×2 | 15 | 5840 | 11680 | 7750×3900×4525 |
FBP-250 | 11×2 | 3340×2 | 5.5×2 | 217×2 | 20 | 6440 | 12880 | 8470×4260×4760 |
FBP-300 | 7.5×3 | 2954×3 | 4×3 | 180×3 | 15 | 8760 | 17520 | 11600×3900×4525 |
FBP-375 | 11×3 | 3340×3 | 5.5×3 | 217×3 | 20 | 9660 | 19320 | 12680×4260×4760 |
About us
Shandong GRAD Group is a large modern enterprise with over two decades history. Our business started in 1993, with staff of over 2200, we are focus on R&D, production, marketing, installation and maintenance for central air conditioning system and G R P composite material products. We are committed to providing customers with one-stop central air-conditioning and FRP composite material product solutions.
For central air conditioning products, we have production facility covering 450000 sqm, we can offer products for the whole system including chillers, heat pumps, cooling towers, A H U s, F C U s and ventilation products. To better participate international project, we have C T I, C E, A H R I certificates to guarantee our products quality.
For G R P composite material products, we have production facility covering 700000 sqm. With its feature of light weight, high strength, anti-corrosion and long service life, the G R P products are ideal replacement for steel products. We can offer process like vacuum injection, G R P winding, S M C mould pressing, molding pultrusion and hand paste. Based on different process, we can offer clients customized products.
GRAD international business starts in 2009, now its products have been exported to 100 countries and regions.
