Industrial Water-cooled Evaporative Air Conditioner
Taking a 1000 square meter workshop as an example, a comparison of investment and usage costs for various types of air conditioners
1.choose the tranditional split AC: 13 sets 5hp AC, Cost around 20,000usd,Total power:48kw,Each air conditioner is independently controlled, with a small coverage area, slow heat transfer speed, and low efficiency.
2.Choose the central air conditioner: 1 sets 60hp air cold chiller,Cost arond 40,000usd,Total power:45kw,The cooling effect is good, but the investment and use costs are high because it cannot be controlled independently.
3.Choose the power saving air conditioner 5 sets 5hp power saving air conditioner, Cost around 15,000usd,Total power:20kw,Good cooling effect, fast heat exchange speed, large coverage area, independent control, low investment and use costs.
Disadvantages: It has requirements on water quality
Industrial Water-cooled Evaporative Air Conditioner
Component Parts
The evaporative energy-saving air conditioning unit consists of a compressor, condenser, expansion valve, evaporator, wet curtain, water tank, water pump and other parts.
Diagram
Operational principle
Through a combination of water cooling, air cooling, and compressor working methods, the external unit first uses wet curtain evaporative condensation technology to cool the circulating water. After the water temperature drops to room temperature, it flows through the heat exchange system of the internal unit (at this time, the compressor has already operated and compressed the refrigerant into a high temperature and high pressure state), taking away most of the heat of the high temperature refrigerant to form a room temperature refrigerant. The room temperature refrigerant then passes through a throttle valve and becomes a low temperature and low pressure refrigerant, which is transported to the evaporator in the upper part of the internal unit to blow out cold air. The circulating water that has cooled the high temperature and high pressure refrigerant is then transported to the upper part of the outdoor unit by a water pump. At the same time, with the assistance of air cooling, it flows through the evaporative water curtain to turn the high temperature water into normal temperature water, which then flows through the indoor unit again The cooling of refrigerant under high temperature and high pressure, and the cyclic operation will maximize the energy efficiency ratio, So as to reduce energy consumption.
| AC Type | Horizontal Axial Flow Wall-mounted Unit | ||
| Type | GRAD-5PW-ZL | Tap water replenishment pipe size | DN20 |
| Rated power supply | 380V~50Hz | Connection pipe size | DN32 |
| Industrial cooling capacity | 25KW | Air supply distance | 8-10M |
| Rated current | 7.5A | Max. air volume | 6500m³/H |
| Rated power | 4.6KW | Exhaust/suction allowable working overpressure (pressure) | 2.8/1.5MPa |
| Max. operation current | 10.5A | Max. allowable high/low pressure | 2.8/1.5MPa |
| Max. operation power | 5KW | Noise | 60dB(A) |
| Cooling water rated in/out temperature | 37/32℃ | Refrigerant/ charging capacity | R22/3200g |
| Cooling water flow | 3.7m³/H | Indoor unit dimensions | 1310*580*705 |
| Cooling water pipe size | DN25 | Outdoor unit dimensions | 810*810*1440 |
| Application area | 150-200sqm | Weight | Indoor128Kg Outdoor95Kg |
About us
Shandong GRAD Group Co.，Ltd. is situated in Dezhou, Shandong. It is a large modern enterprise with the research & development, design, production, sales, installation and maintenance for central air conditioning products, composite material products and solar energy products. It is named as the pillar enterprise by China Refrigeration and Air Conditioning Industry Association(CRAA) and is one of the leading enterprises in central air conditioning and composite material industries.
GRAD Group devotes itself to be a central air conditioning customization expert around you and provides you a comprehensive energy solution, GRAD possesses national mechanical and electrical equipment installation Class I qualification and purification equipment installation Class II qualification. GRAD has the overall project contacting ability. It has contracted national class and provincial class technology research projects for many times. The accumulated patents for technolog achievements has passed 110 items. There are more than 300 senior engineers available for central air conditioning design and solution. The 700,000 ㎡ manufacturing base includes the whole central air conditioning series: from chiller to terminal products. The high efficient falling film centrifugal chiller maintains domestic leading position and the large fan wall air handling unit has filled domestic blank and been listed in the national torch plan. GRAD has the national class air conditioning testing center and has passed CNAS certification. The products quality can be well guaranteed. Some of projects gained China Construction Project Luban Prize and National High Quality Project. At the same time, GRAD has established more than 30 offices all over China, such as Beijing, Tianjin, Shenyang, Xi’an, Wuhan, Nanjing, etc. The sales, design, installation and after sales network has covered every corner of China. Moreover, its products have been exported to more than 100 countries.
Express and payment
1. Packing: Standard Export Carton Packing or plywood package.
2. Delivery Day: 20 days after deposit is confirmed.
3. Delivery Term: FOB,CIF,CFR or EXW are welcomed.
4. Payment Term: T/T,30% deposit,70% before delivery or 100% Irrevocable L/C at sight.
5. Warranty: Warranty for 12 months from the date of shipment from the factory.
6. Payment Currency: USD,EUR or CNY.
7. For sample or small quantity one or two, We suggest Express DHL etc.
